Cold Room External Profiles
Cold room external profiles finish and protect the exposed edges and external corners of insulated panels. They provide a clean, continuous finish where panel surfaces meet and help protect vulnerable panel edges from impact and everyday use.
Frigovetta Refrigeration System manufactures cold room external profiles to suit different panel junctions and room layouts. The appropriate profile depends on the shape of the external corner, the panel construction, the surface it covers and the installation detail.
Finishing and Protecting External Panel Edges
A well-fitted external profile follows the panel surfaces closely. Its width should cover the intended edge or corner, with fixings and sealants selected to suit the panel facing and installation detail.
External profiles are used where Cold Room Panels require a separate finishing and protective piece. They can be applied to exposed external corners and panel edges where a clean appearance and additional edge protection are required.
Choosing the Right External Finish
A standard external angle provides a straightforward corner finish. For different panel layouts and exposed edges, the profile geometry should match the connection and the required coverage. The choice comes down to the external junction, panel construction and installation requirements.
For chilled rooms and freezers, material compatibility matters as much as appearance. Moisture, cleaning chemicals, operating temperature and the expected mechanical exposure should all be considered when choosing the profile and its fixing method.
Completing the External Connection
The visible profile is one part of the external junction. The underlying panel connection must maintain insulation continuity and the specified seals. Profile ends and intersections should also fit neatly, without leaving unnecessary gaps or exposed panel edges.
Send us your panel details and the external junctions you need to finish. Frigovetta Refrigeration System can help identify the appropriate external profile for the installation.
| Feature | Description |
|---|---|
| Product Type | External panel finishing and protection profile |
| Main Applications | External corners and exposed panel edges, where required by the panel design |
| Profile Geometry | Matched to the external corner, edge or connection |
| Material and Finish | Defined by the selected product specification |
| Dimensions | Profile width and length selected for the external junction |
| Fixing Method | Compatible with the panel facing and installation detail |
| Cleaning Compatibility | Assessed against the cleaning products and method used |
| Joint Coordination | Installed alongside the specified panel insulation and sealing details |
- Covers exposed external edges and corners of insulated panels.
- Gives external panel connections a consistent and finished appearance.
Galeri
